Datum Supply Request Quote
§ 00 · Overview Now Shipping · Iowa, USA

Magnetic 3D scanning targets,
better than the OEM kit.

PoseMark™ Dice: retroreflective magnetic dodecahedron targets in 3 mm, 6 mm, and 12 mm — on a deployment tray that cuts setup and teardown ~25% and keeps every die accounted for. $16–20 per 6 mm target instead of the OEM's $33.

Request a quote See pricing
A PoseMark die on its magnetic standoff base — retroreflective targets on eleven faces
3 sizes · In stock
11 retroreflective targets Lifetime warranty Assembled in USA
§ 01 · Product

PoseMark™ Dice

Fig. 01 / Mid-scan PoseMark dice on a plate under a scanner's blue laser grid, beside a calibration sphere, mid-scan

Eleven1 targets.
One magnetic die.

Stop fussing with sticker targets. PoseMark™ Dice place 11 retroreflective targets in a single magnetic placement — eleven angles, eleven scanner-visible faces, no peeling, no surface prep, no leftover residue.

Geometry11-face dodecahedron
TargetsRetroreflective
Sizes3 · 6 · 12 mm — shipping
MagnetMechanically fastened
FootprintSmallest 6 mm standard
CaseWaterproof · tray inside
Packs20–120 dice · by size
WarrantyLifetime · dice & magnets
TraySteel + aluminum · double-sided
OriginAssembled in USA

1 The twelfth face is the magnetic base, mechanically fastened — not glued — so it can't separate under hard production use. Eleven faces remain target-visible in any orientation, including low-angle scanner sweeps where flat stickers fail.

§ 02 · Deployment tray

Deploy. Scan. Tap them home.

The deployment tray.

Every PoseMark™ pack ships on a removable, double-sided magnetic tray — for easier and faster scanning. Lift the tray out of the case, carry every die to where it's going, deploy, and tap them home when the scan is done.

01~25% faster

The OEM case seats each target for one-at-a-time removal and replacement. Our tray lifts out of the case entirely — carry every die to where it's going, deploy, and tap them home. Timed: about a quarter of setup and teardown, gone.

02One case, not four

100+ die jobs that used to mean three or four OEM kit cases now fit one 120-case.

03Count at a glance

An empty position shows an orange index — a missing die is visible before you leave the site.

04Built like the dice

Powder-coated steel and aluminum in a waterproof Pelican case, covered by the same lifetime warranty as the dice. Nothing here is glued — OEM case plates are, and they work loose with use.

Tray spec — steel + aluminum · powder-coated · double-sided · orange magnetic indices

6 mm lineup · trays out The 6 mm case lineup stacked, with two deployment trays out of their cases and loaded with dice
§ 03 · Pricing

Three sizes. Eight packs. In stock.

Showing6 mm Now shipping
All prices USD · Bulk & custom configurations on request Every pack ships on the deployment tray · included
§ 04 · Comparison

Better kit. Half the invoice.

OEM kit × 3
3 × OEM Magnetic Target Kit 6 mm · 117 targets · three cases · one-at-a-time removal · $1,300 per kit
USD3,900
Per target
$33.33
Minimum buy
39 targets
List price · no smaller pack offered
You save $1,950 Exactly half
Datum Supply
PoseMark™ Dice · 6 mm 120-pack 120 targets · one deployment-tray case · lifetime warranty
USD1,950
Per die
$16.25
Setup + teardown
~25% faster
Assembled in USA · Free CONUS shipping

Need one kit's worth? Our 6 mm 40-pack is $749 — $551 less than their kit, with one more die and the tray. Need fewer than 39? They won't sell it to you; our 20-pack is $399.

§ 05 · Compatibility

Works with the scanner you already own.

Creaform / 01

  • HandySCAN 3D — EVO Series
  • HandySCAN 3D — MAX Series
  • HandySCAN 3D — BLACK Series
  • HandySCAN 3D — PRO Series
  • HandySCAN 3D — SILVER Series
  • MetraSCAN 3D
  • GoSCAN 3D

Peel 3D / 02

  • Peel 1
  • Peel 2 / Peel 2-S
  • Peel 3 / Peel 3-CAD

Artec / 03

  • Leo (target-tracking mode)
  • Ray II (with target frame)

FARO / 04

  • Freestyle 2
  • Freestyle 3D

Polyga / 05

  • Compact S1
  • HDI Compact / Advance

Other / 06

  • Most photogrammetry-positioning scanners
  • Custom retro-target metrology rigs
  • Not sure? Email us — we'll confirm.

3 mm

Not compatible with Creaform scanners. Compatible with most Chinese-market scanners, including the Scantech KSCAN series.

6 mm

The systems listed above — HandySCAN, MetraSCAN, Peel 3D, Artec Leo, and similar handheld metrology scanners.

12 mm

For MetraSCAN, HandySCAN MAX, and similar large-format scanners.

Compatibility based on use of standard retroreflective positioning targets · Brand names belong to their respective owners — listed for compatibility reference only.

§ 06 · About

An Iowa engineering shop.

Top-down view of the PoseMark 20-pack — dice seated on the deployment tray inside its waterproof case

Datum Supply is run by working quality engineers in Des Moines, Iowa who got tired of paying OEM prices for accessories that should cost a fraction as much and perform twice as well. PoseMark™ Dice are designed, assembled, and packed in our shop. The result is a target system — dice, deployment tray, waterproof case, lifetime warranty — for less than the OEM kit.

We sell direct. Every die ships with a lifetime warranty on the body and the magnet. Quotes turn around in one business day. Bulk and custom configurations (mixed packs, different magnet strengths, branded cases for resellers) are available on request. If you scan parts for a living and the math hurts, we'd like to hear from you.

BasedDes Moines, Iowa
Lead time1–3 business days
WarrantyLifetime · dice & magnets
§ 07 · Quote

Request a quote.

One business day, no sales call.

Tell us the size, pack, and any custom requirements. We'll reply with a firm price, lead time, and shipping cost. No demo required, no SDR follow-up, no annual contract.

If you'd rather skip the form:

Direct contact info@datum.supply
+1 (563) 349‑0890
Mon–Fri · 8 a.m. – 5 p.m. CT
We'll reply within 1 business day. Your info isn't shared.